If you want to hit buttery smooth superglides in Apex Legends, your Wooting keyboard can be a total game changer. Thanks to analog input and rapid trigger tech, Wooting boards let you fine-tune movement in ways traditional keyboards simply can’t. But here’s the catch: default settings won’t unlock their full potential. You need the right tweaks.
TLDR: Use low actuation points (0.1–0.3mm), enable Rapid Trigger with a very small reset distance, and fine-tune your movement keys individually. Focus on consistency, not just speed. Adjust deadzones carefully and practice timing after every change. Small tweaks make a big difference in landing superglides.
Why Wooting Is Perfect for Superglides
Superglides require exact timing. You must:
- Climb a ledge
- Press jump
- Hit crouch
- Release at the right frame
The timing window is tiny. Almost pixel perfect.
Traditional keyboards have fixed actuation points. Usually around 2mm. That means you must bottom out or reset fully before the next press registers.
Wooting keyboards are different.
- Adjustable actuation (as low as 0.1mm)
- Rapid Trigger technology
- Analog input control
- Custom per-key settings
This gives you more control over movement timing. And that control is everything for superglides.
Core Settings for Superglide Success
Let’s get into the actual tuning.
1. Actuation Point: Go Ultra Low
Best range: 0.1mm – 0.3mm
Lower actuation means the key activates almost instantly when pressed.
For superglides, focus on these keys:
- Space (Jump)
- Ctrl or C (Crouch)
- W (Forward)
Set jump and crouch to 0.1mm or 0.2mm.
This reduces delay. It also reduces finger travel.
But there’s a warning.
Too low can cause accidental presses. If that happens, bump it to 0.3mm. Stability beats theory.
2. Enable Rapid Trigger
If you skip this, you’re wasting your keyboard.
Rapid Trigger removes the fixed reset point.
Instead of needing to release the key fully, it resets the moment you lift your finger slightly.
Recommended setting:
- Press sensitivity: 0.1–0.2mm
- Release sensitivity: 0.1–0.2mm
This makes spam inputs cleaner and faster.
For superglides, this helps because:
- Your crouch resets faster
- Your jump timing feels sharper
- Movement chaining becomes smoother
It feels different at first. But after 30 minutes, it feels unfair. In a good way.
3. Disable Tachyon Mode? No. Turn It On.
If your Wooting model supports Tachyon Mode, enable it.
This reduces latency slightly. Is it massive? No.
But with superglides, we care about milliseconds.
Every little bit counts.
Advanced Per-Key Optimization
Here’s where things get spicy.
Instead of using one actuation setting for all keys, customize movement keys individually.
Recommended Per-Key Setup
| Key | Actuation | Rapid Trigger | Reason |
|---|---|---|---|
| Space (Jump) | 0.1mm | On | Faster jump registration |
| Crouch | 0.1–0.2mm | On | Critical for glide timing |
| W | 0.3mm | On | Reduces accidental inputs |
| A / D | 0.4mm | On | Better strafe control |
Notice something?
Not everything is at 0.1mm.
Why?
Because movement stability matters. If every key is ultra sensitive, you might misinput during fights.
Analog Settings: Should You Use Them?
Short answer: No for superglides.
Analog movement sounds cool. But Apex is balanced around digital input.
For superglide timing, crisp on/off signals are better.
Stick with digital mode for movement keys.
Use analog only if you really understand how to fine-tune curves. Most players don’t need it.
Image not found in postmetaHow to Practice After Tuning
Changing settings is step one.
Now you must retrain muscle memory.
Here’s a simple routine:
- Load into Firing Range
- Pick a consistent ledge
- Attempt 50 superglides
- Track how many succeed
If success rate is below 50%, adjust slightly.
Common fixes:
- Missing early → raise actuation slightly
- Missing late → lower actuation
- Inconsistent → adjust release sensitivity
Change one variable at a time.
Never everything at once.
Common Mistakes to Avoid
1. Going Too Sensitive Everywhere
Yes, 0.1mm feels fast.
But it can ruin regular gameplay.
You don’t want accidental slides mid-fight.
2. Ignoring Release Distance
Superglides require fast press and clean release.
If release sensitivity is too high, it feels muddy.
Keep it tight.
3. Blaming Settings Instead of Timing
Settings help.
But superglides are mostly practice.
Your keyboard won’t magically fix poor timing.
Example “Pro Style” Superglide Profile
If you want a baseline to copy, try this:
- Global actuation: 0.3mm
- Space: 0.1mm + Rapid Trigger
- Crouch: 0.1mm + Rapid Trigger
- W: 0.3mm + Rapid Trigger
- A/D: 0.4mm + Rapid Trigger
- Tachyon Mode: On
- Analog: Off
This profile is aggressive but stable.
Perfect for movement-heavy players.
Image not found in postmetaDoes Keyboard Size Matter?
60% vs TKL vs full size?
No real difference for superglides.
What matters:
- Switch type (Lekker linear recommended)
- Rapid Trigger support
- Stable keycaps
Consistency beats layout.
How Long Until It Feels Natural?
Usually:
- 30 minutes to adjust
- 2–3 hours to feel smooth
- 1–2 days to fully adapt
Don’t panic if it feels “too sensitive” at first.
Your old keyboard probably had 2mm actuation. This is radically different.
Give it time.
Final Thoughts
Superglides are flashy. But more importantly, they’re powerful.
They give you:
- Instant momentum
- Harder-to-track movement
- Better repositioning options
A Wooting keyboard doesn’t just make superglides easier.
It makes them more consistent.
And consistency wins fights.
Start with low actuation. Turn on Rapid Trigger. Fine-tune release. Practice with purpose.
Small adjustments. Massive results.
Now go hit those clips.
